C12000 Cu-DLP Copper Bar
Different Material Names for C12000 Pure Copper Bar: GB- TP1, ISO- Cu-DLP, ASTM- C12000, JIS- C1201, DIN- SW-Cu.
C12000 Pure Copper Bar is one kind of copper material used in high stability with maintenance’s roofing and curtain wall in buildings. C12000 is with good property performances in environmental protection, safe when application, easy for machining and especially anti- corrosion.
When production for C12000 Pure Copper Bar, the available sizes are: Thickness- 0.05mm to 60mm; Width- Up to 3000mm; Length- Up to 6000mm.
Product Description
| Copper Rod - Product Specification Table | ||
| Property Category | Specification | Description / Typical Values |
| General Information | Common Names | Copper Rod, Copper Bar, Copper Round Bar |
| Material Standards | ASTM B187, ASTM B152, C11000, C10200 | |
| Material Composition | Primary Alloys | C11000 (Electrolytic Tough Pitch Copper) |
| Copper Content | 99.90% min (C11000) | |
| Oxygen Content | 0.02%-0.04% (ETP copper) | |
| Physical Properties | Density | 8.94 g/cm³ |
| Melting Point | 1083°C (1981°F) | |
| Electrical Conductivity | 100% IACS min | |
| Thermal Conductivity | 391 W/m·K | |
| Mechanical Properties | Tensile Strength | 250-380 MPa (36,000-55,000 psi) |
| Yield Strength (0.2% Offset) | 200-350 MPa (29,000-51,000 psi) | |
| Elongation | 12%-45% | |
| Hardness | Rockwell B 40-85 | |
| Key Characteristics | Conductivity | Excellent electrical and thermal conductivity |
| Corrosion Resistance | Excellent; resistant to atmospheric and aqueous environments | |
| Machinability | Fair (20% of free-cutting brass) | |
| Formability | Excellent; can be hot and cold worked | |
| Available Forms | Diameter Range | 3mm-300mm (0.125"-12") |
| Length | 1m-6m (3ft-20ft) | |
| Temper | Annealed (soft), Half-hard, Hard | |
| Shape | Round, Square, Hexagonal | |
| Common Applications | Electrical | Bus bars, switchgear components, electrical contacts |
| Industrial | Heat exchangers, welding electrodes, machinery parts | |
| Construction | Plumbing fittings, roofing elements, architectural details | |
| Manufacturing | Base material for forged and machined parts | |
