CuSn4Pb4Zn4 C54400 Phosphor Bronze
The bronze alloy is made by pure copper(red copper) after adding tin or plumbum alloys. Compared with pure copper (red copper), bronze has high strength and low melting point (25% tin bronze's melting point is 800℃).The melting point of pure copper (red copper) is 1083℃.Bronze has good performance in casting, abrasion resistance and stability of chemical properties. Beryllium bronze, aluminum bronze, tin bronze and CuNi2Si bronze are popular alloy types of bronze.
Product Description
| Bronze Coils - Detailed Technical Specifications | ||||
| Common Bronze Coil Grades and Compositions | ||||
| Alloy Designation | Common Name | Nominal Composition | Typical Applications | |
| Cu94/Sn 6 | Phosphor Bronze (6% Tin) | Cu 94%, Sn 6% | High-strength coil products, springs, electrical connectors | |
| Cu92/Sn 8 | Phosphor Bronze (8% Tin) | Cu 92%, Sn 8% | Higher strength and wear resistance, heavy-duty springs | |
| Cu95/Sn 5 | Phosphor Bronze (5% Tin) | Cu 95%, Sn 5% | Good balance of strength and ductility | |
| UNS C52100 | Phosphor Bronze (C52100) | Cu Balance, Sn 8.0%, P 0.03-0.35% | High fatigue strength springs, bellows, and diaphragm components | |
| CuSn (Tinned Alloy) | Tinned Copper Alloy Coil | CuSn base with Sn60/Pb40 coating | Printed circuit boards, electrical shielding, battery terminals | |
| Mechanical Properties of Bronze Coils | ||||
| Property | Phosphor Bronze (Cu94/Sn 6) | Phosphor Bronze (Cu92/Sn 8) | Tinned Copper Alloy (CuSn) | |
| Tensile Strength (MPa) | 320 – 740 | Not specified | 200 – 400 | |
| Elongation at Break (%) | 60 | Not specified | 50 | |
| Hardness | Brinell: 80 – 225 | Not specified | Vickers: 40 – 120 kgf/mm² | |
| Modulus of Elasticity (GPa) | 90 – 120 | Not specified | 117 | |
| Izod Impact Strength (J/m) | 62 | Not specified | Not specified | |
| Shear Strength (MPa) | 250 – 430 | Not specified | Not specified | |
| Dimensional Specifications for Bronze Coils | ||||
| Alloy Type | Thickness Range | Width Range | Length Range | Temper |
| Phosphor Bronze (Cu94/Sn 6) | 0.02 mm – 0.5 mm | 20 mm – 310 mm | 0.5 m – 100 m | As Rolled, Hard, Half Hard |
| Phosphor Bronze (Cu92/Sn 8) | 0.1 mm – 0.2 mm | 200 mm | 1 m – 10 m | As Rolled |
| Phosphor Bronze (Cu95/Sn 5) | 0.2 mm | Not specified | Not specified | Variable |
| Phosphor Bronze (UNS C52100) | 0.05 mm – 2.0 mm | 10 mm – 600 mm | Not specified | O60 (Soft), H04, H06, H08 (Hard) |
| Tinned Copper Alloy (CuSn) | 0.05 mm – 0.125 mm | 0.25 mm – 0.75 mm | 10 m – 100 m | Annealed |
