

C26800 Brass Plate/ Coil/ Strip is with good performances in mechanical properties and machinability in hot pressure and cold pressure processing. C26800 is widely used in the applications of structural parts as bushings, gaskets, etc. Besides, Tin brass materials has high corrosion resistance and are widely used as raw materials for corrosion resistant parts of ship, vapor, oil’s industrial fields.

| Brass Plate: Comprehensive Details | |||
| Common Brass Alloy Grades for Plate Form | |||
| UNS Number | Common Name | Nominal Composition (Cu/Zn) | Key Characteristics |
| C21000 | Gilding Brass (95/5) | 95% Cu / 5% Zn | Excellent corrosion resistance, good formability |
| C22000 | Commercial Bronze (90/10) | 90% Cu / 10% Zn | Well suited for cold forming; higher strength than pure copper due to zinc content |
| C22600 | Jewelry Bronze (87.5/12.5) | 87.5% Cu / 12.5% Zn | Good formability, decorative applications |
| C23000 | Red Brass (85/15) | 85% Cu / 15% Zn | Good strength, corrosion resistance |
| C24000 | Low Brass (80/20) | 80% Cu / 20% Zn | High strength, good plasticity |
| C26000 | Cartridge Brass (70/30) | 70% Cu / 30% Zn | Exceptional cold workability, high strength-to-ductility ratio |
| C26800 | Yellow Brass (65/35) | 65% Cu / 35% Zn | Good balance of strength and ductility |
| C27200 | Yellow Brass (63/37) | 63% Cu / 37% Zn | General purpose applications |
| C28000 | Muntz Metal (60/40) | 60% Cu / 40% Zn | Higher strength, good hot working properties |
| Available Plate Thickness & Tolerances | |||
| Plate Thickness (mm) | Uncut Material Width × Length (mm) | Plate Thickness Tolerance (mm) | Temper |
| 0.2 | 365 × 1200 | ±0.02 | 1/4H |
| 0.3 | 365 × 1200 | ±0.03 | 1/4H |
| 0.4 | 365 × 1200 | ±0.04 | 1/4H |
| 0.5 | 365 × 1200 | ±0.05 | 1/4H |
| 0.8 | 365 × 1200 | ±0.05 | 1/4H |
| 1 | 365 × 1200 | ±0.05 | 1/4H |
| 1.2 | 365 × 1200 | ±0.05 | 1/4H |
| 1.5 | 365 × 1200 | ±0.06 | 1/4H |
| 2 | 365 × 1200 | ±0.06 | 1/4H |
| 2.5 | 365 × 1200 | ±0.08 | 1/4H |
| 3 | 365 × 1200 | ±0.08 | 1/4H |
| 4 | 365 × 1200 | ±0.10 | 1/4H |
| 5 | 365 × 1200 | ±0.10 | 1/4H |
| Comparison: Brass Plate vs. Brass Sheet vs. Brass Coil | |||
| Attribute | Brass Plate | Brass Sheet | Brass Coil |
| Thickness | Generally ≥ 0.125 in (3.2 mm) | Generally < 0.125 in (3.2 mm) | 0.005 mm to 0.125 in |
| Form | Flat, rigid | Flat, flexible | Continuous strip wound into coil |
| Primary Standard | ASTM B36/B36M | ASTM B36/B36M | ASTM B36/B36M |
| Primary Alloys | C22000, C26000, C28000 | C22000, C26000, C26800 | C22000, C26000, C26800 |
| Primary Applications | Structural, decorative, ammunition | Springs, connectors, stampings | Stamping, progressive die operations |
| Temper Availability | Generally hot-rolled temper -8 | Wide range of tempers | Wide range of tempers |


